Fire Damage Repair in Nice, CA
The debris is gone and the odor is nearly out, yet the house is still open framing and plywood. One free call to Unify Fire Solutions connects you with a licensed and insured independent contractor in Nice who handles the rebuild: framing, wiring, drywall, roofing and the finish work that makes it feel like home again. Dispatch starts while you are still on the line, and the phone is answered 24/7.
- Rebuild contractors who work from your adjuster's scope
- A written, line-item estimate before any framing starts
- Contractors who pull permits and schedule inspections
Getting your home back after the cleanup
Cleanup leaves the house safe and stripped. Repair is the slower phase that makes it livable again, and it depends on permits, inspections and an insurance scope that almost never catches everything the first time.
Independent Pros, Licensed and Insured
Reconstruction is general contracting, and most jurisdictions require a licensed contractor to pull the building permit. The independent contractors we connect you with carry their own license and liability coverage, and electrical and plumbing work goes to licensed trade subcontractors. Ask to see the license and a certificate of insurance before you sign, then verify both.
Written Estimates Before Work
A rebuild should never start on a verbal number. The contractor who walks your property writes a line-item estimate, usually in the same estimating format insurers use, so each line can be held up against the adjuster's scope. If a line is missing, such as drywall texture or an arc-fault breaker, it shows up in black and white.
Fast Local Matching
The line is staffed 24/7, and matching you with a contractor near Nice starts on the first call. A walkthrough often happens the same day or the next, depending on crew availability and distance. That gets your estimate in front of the adjuster sooner.
Tools Built for Rebuilding
Rebuild crews show up with gear a cleanup crew never carries. Expect moisture meters to confirm framing is dry before it gets closed in, framing nailers and joist hangers, laser levels for flattening a sistered floor, and a paint spectrophotometer for blending new walls into the rooms that survived.
Fire Damage Repair, from studs to paint
Every burned house is different, but the rebuild almost always follows the same order: structure, systems, envelope, then finishes.
The hardest part for most homeowners is not the construction itself. It is knowing what should be on the list. An adjuster writing a scope from the doorway can miss the joist that is charred on its top edge, the circuit that cooked inside a wall two rooms away, or the PEX line that sagged above the ceiling. A contractor who opens wall cavities and probes the lumber catches those items while the walls are still open, not a year later.
The work below is what the independent contractors in our network typically handle on a fire rebuild in Nice. Your job may need some of it or all of it, and the written estimate will spell out which.
Scope and Estimate Review
The adjuster's scope is the starting point, not the final word. The contractor compares it line by line against what actually burned, scorched or got soaked, and writes a supplement for anything missed.
- Line-by-line comparison with the scope of loss
- Photos and measurements behind each supplement
- Meeting the adjuster on site when needed
Joists, Studs and Framing
Charred lumber gets probed and measured, not guessed at. Joists with shallow char are often sistered with new lumber fastened alongside, while deep char or cracked members are cut out and replaced.
- Char depth checks with an awl or probe
- Sistering, new headers and top plates
- Engineer review for load-bearing changes
Wiring and Plumbing Replacement
Heat travels along a circuit well past the burn line. Cable jackets can harden or melt inside a cavity, so licensed electricians normally rerun any circuit that passed through the heat. PVC softens at modest temperatures and PEX is not built for fire heat, so melted runs get replaced by licensed plumbers.
- New circuits, boxes and panel work
- Melted PEX, PVC and fittings replaced
- Pressure test before the walls close
Drywall, Insulation and Vapor Barriers
Once framing passes inspection, walls go back up in order: insulation, a vapor retarder where code calls for it, then drywall, tape, mud and texture.
- Batts, blown cellulose or foam to code
- Type X board on garage and rated walls
- Texture matched to surviving rooms
Roofing, Windows and Doors
A fire that vents through the roof leaves charred rafters, delaminated sheathing and shingles that will never seal again. The contractor replaces decking, underlayment and roofing, then sets new windows and exterior doors where heat cracked glass or warped frames.
- Rafter repair and new roof decking
- Underlayment, flashing and roofing
- Replacement windows and entry doors
Flooring, Cabinets and Finishes
Finish work is the part you will live with every day. New cabinets, counters and flooring go in, paint is color-matched, and trim is milled or sourced to match the profiles in the rooms that made it through.
- Cabinet and countertop replacement
- Flooring matched or replaced room to room
- Paint, trim and hardware matching
About code upgrades: Pulling a repair permit often brings current-code requirements with it, like interconnected smoke and CO alarms or arc-fault breakers on living-area circuits. Many homeowner policies include ordinance-or-law coverage that may help pay for those upgrades. Limits vary, so ask your adjuster what your policy says before the permit is pulled.
Ready to start the rebuild?
A single free call puts you in touch with an independent rebuild contractor in the Nice area, any hour of the day.
Call +1-833-336-1630From the first call to the final walkthrough
Fire rebuilds take weeks or months, so knowing the order of things up front saves a lot of stress.
- 1
Call the Dispatch Line
Let the dispatcher know how far cleanup has gotten, whether you have an adjuster's scope yet, and which rooms took the fire. The call is free, and the line is open 24/7.
- 2
Your Walkthrough Gets Scheduled
A rebuild contractor in the Nice area is matched to your job and books a walkthrough, often the same day or the next. Timing depends on crew availability and distance.
- 3
Assessment and Written Quote
The contractor probes framing, takes moisture readings, opens a few wall cavities to trace wiring, and photographs everything. A written, line-item estimate follows, and you review it with your adjuster before anyone picks up a hammer.
- 4
Work Done, Then a Walkthrough
Permits are pulled, rough-in inspections pass, and the house is closed in and finished. The job ends with a room-by-room walkthrough and a punch list, and the final sign-off waits until every line is cleared.
How the rebuild went for people who called
The insurance scope only listed drywall and paint over the stove. The contractor pulled the ceiling and found the joists above it charred halfway through. He sistered three of them, sent photos to the adjuster, and the supplement was approved the following week.
The fire stayed in the garage, or so we thought, until the electrician found cooked wiring that ran into the laundry room. Those circuits got rerun, the garage got Type X board, and the inspector passed it on the first visit.
I own a duplex and had tenants waiting to move back in. The contractor handled the permit, kept me updated after each inspection, and worked through the punch list in two days. My tenants were home sooner than I expected.
My biggest worry was the hallway, where half the oak floor burned and the other half survived. New boards were laced into the old, the whole hall was refinished, and nobody can tell where the damage ended.
Common questions about rebuilding
How long does it take to rebuild a house after a fire?
One burned room, such as a kitchen, is often finished within a few weeks of estimate approval. A loss that reaches the roof or several rooms often takes several months, because permits, inspections, engineering and material lead times stack up. Ask the contractor for a written schedule with the inspection points marked.
Do I need a building permit to repair fire damage?
Usually, yes, as soon as the work involves more than paint and trim. New framing, circuits, pipes or roofing nearly always need a permit, with inspections at rough-in and at the end. The licensed contractor normally pulls it, and the inspector's sign-off protects you when you sell or refinance later.
Can charred joists be repaired, or do they have to be replaced?
That comes down to char depth and whether the joist can still carry what it was sized for. Light surface char is usually cleaned and sealed, and moderate char is typically handled by sistering new lumber alongside. Deep char, cracking or sagging generally means replacement, sometimes with an engineer's letter.
Does all the wiring have to be replaced after a house fire?
Not every wire, though anything that ran through the hot area needs inspection and is commonly replaced. Heat can damage the insulation on a cable inside a wall even where the drywall looks fine. A licensed electrician traces the runs, tests them, and the work is inspected before walls close.
What if the contractor's estimate is higher than the insurance adjuster's?
It happens a lot, and it usually does not mean someone is inflating the bill. The contractor submits a supplement listing what was missed, backed by photos and measurements, for the adjuster to review. Many differences come from hidden damage that was found once walls and ceilings were opened.
Who pays for code upgrades when rebuilding after a fire?
Ordinance-or-law coverage, included in many policies, may help pay to bring rebuilt areas up to today's code. Coverage amounts differ from policy to policy, so check your declarations page or ask the adjuster early. Typical items are smoke and CO alarms, arc-fault breakers and updated stair or egress details.
Fire Damage Repair in Nice and surrounding neighborhoods
We take calls from every part of Nice and the communities around it, from older homes with plaster and knob-and-tube surprises to newer builds with engineered joists and PEX manifolds. The dispatcher matches you with an independent contractor who already works in your area and knows the local permit office.
- Kitchen rebuilds
- Garage fires
- Roof and attic losses
- Rental units
- Condos and townhomes
- Small businesses
Zip codes we take calls from include 95485 95464. When the mess is gone and you want your house back, call and a dispatcher starts matching you right away. If the first contractor is not the right fit, call back and we will connect you with another one.
